Bio-Probe Spinner Flask Complete 3L SKU: 1965-97003

Description

Description: Bio-Probe Spinner Flask Complete
Bio-Probe Spinner Flask Complete consists of: Flask, and Impeller Assembly.

Flask Specifications:
Material: Type 1 Class A Borosilicate Glass
Dimensions: 168mm OD x 290mm Overall Height, 278mm across side arms
Two 45mm Side arms angled 53* off center
Two 32mm Side arms angled 35* off center
One 100mm Screw Thread Center Neck
Indented bottom
Graduations: 500mL to 3000mL, every 500mL – White Ink (Approx Volumes)
Supply with: Two 45mm PP Blue Screw Caps, two PP Blue Pouring Rings, two 32mm blue screw caps, and two o-rings
Impeller Assembly Specifications:
Impeller Assembly consists of paddle, shaft, O-ring, retaining ring, magnet, magnet holder, adjustable paddle, bearing thimble, bearing spacer, ball bearing, compression spacer, compression washer, sealing ring, cap seal, and screw cap. Adjustable from 267mm-305mm in height.
Paddle: Polytetrafluoroethylene, 4 1/4″x3″x1/16″
Shaft: 316L Stainless Steel, 8 7/16″ long x 1/4″ OD
O-ring: Silicone, -008
Retaining ring: 316L SST, 0.365″ OD x 17/64″ ID x 5/32″ long
Magnet: PTFE coated, 1/2″ OD x 3″ long
Magnet holder: PTFE, 3/4″ OD x 1/4″ ID x 4 11/16″ long
Adjustable paddle: PTFE, 3 3/8″x 1 1/2″ with a hub OD of 1 1/2″
Bearing thimble: PTFE, 1 1/4″ OD by 4/4″ ID x 3 1/8″ long
Bearing spacer: PTFE, 3/4″ OD x 1/2″ ID x 0.880″ long
Ball bearing: Polybutylene terephthalate & SST, 3/4″ OD x 1/4″ ID x 0.281 thick
Compression spacer: PTFE, 3/4″ OD x 1/2″ ID x 1.645″ long
Compression washer: White Silicone, 1 1/16″ OD x 1/2″ ID x 1/16″ thick
Sealing ring: Red silicone, 3.6″ OD x 3″ ID x 0.240″ thick
Cap seal: PTFE, 3 3/4″ OD x 0.985″ long
Screw cap: Blue Polypropylene, 4.25″ OD x 7/8″ long